BMW motorcycles come with the promise of high-performance and reliable riding. BMW bikes need to be maintained regularly and have parts occasionally replaced to run smoothly. You can easily replace BMW motorbike parts to save money if DIY is your thing. In this guide, you’ll learn how to replace common BMW motorcycle components so your motorcycle stays in top condition.
1. Replacing Your Air Filter
It’s important to maintain your BMW motorbike’s air filter. It keeps dirt and debris out of the engine. However, it can clog over time and decrease the engine’s efficiency. Replacing your air filter will improve your motorcycle’s performance.
How Replace:
- Locate Air Filter: The air filter is usually behind or under a side panel on BMW motorcycles.
- Remove Cover: Use the screwdriver to remove the screws.
- Remove Your Old Air Filter: Remove your old air filter gently and inspect it for dirt. Clean the box as necessary.
- Insert the Filter. Place the filter in the compartment. Replace the lid and tighten up the screws.
A good way to maintain a clean engine is to replace your air filter every 12,000 kilometres (or as per your bike manual).
2. Change Brake Pads
Brake pads are an important part of your riding experience and safety. Weakening brake pads reduces braking efficiency, increasing stopping distances and dangerous situations. Replacing brake pads doesn’t require advanced mechanical skills.
How Replace:
- Elevate the Motorcycle: Use a stand to lift your motorcycle. This will give access to your wheels.
- Unbolt the Caliper: Use a hex wrench to remove the calliper screws, and then slide off the brake disc.
- Remove Your Old Pads. Gently remove the old brake pads from the calliper. Record their position for the new brake pads.
- Inserting the New Pads: Slide new pads into position. Check that they are correctly seated.
- Replace the Calliper: Position the calliper and tighten its bolts.
Only use high-quality BMW parts to achieve the best performance and safety. Also, check your brake fluid level and replace it if necessary.
3. Replacing Battery
A well-maintained BMW motorcycle battery will help it start easily when the weather is cold. If you have trouble starting your bike or the electrical components malfunction, it may be time for a new battery.
How Replace:
- Locate Battery: The battery can be found under the seat and side panels.
- Reconnect the Old Battery: Remove the negative (marked by a minus) terminal to avoid electrical shorts.
- Take out the Battery: Unscrew or remove any straps or mounting bolts holding the battery.
- Installing the New Battery: Place the new battery in the compartment. Secure them with the mounting straps or bolts. Connect the positive and negative terminals first.
- Voltage Check: After installation, verify that the new batteries are working correctly by measuring the voltage with a voltmeter.
A motorcycle battery needs to be replaced. But it’s a great year, better to regularly monitor.
4. How To Change The Oil And Oil Filter
Motorcycle oil keeps the engine running smoothly by lubricating it. Over time, however, oil can degrade, reducing the engine’s performance and increasing wear and tear on internal components. Therefore, it is important to change your oil regularly to ensure that your BMW motorcycle engine lasts longer.
How Replace
- Warm up Engine: Run the engine for several minutes to heat the oil. It will be easier to drain.
- How to Drain the Oil: Place a drainage pan underneath the oil-drain bolt. Remove it and let the oil drain entirely.
- Replacing the Oil Filter: Use the oil filter wrench to remove your old oil filter. Install the replacement filter and ensure it’s seated properly.
- New Oil: Once the old oil has been removed, replace it with the drain oil. Fill the new engine oil in the fill cap. Check your oil level using the dipstick. If necessary, you can add more.
BMW parts are maintained, and engine health is improved by changing oil every 3,500 to 5,000 miles.
Conclusion
Common BMW parts can be replaced with a basic tool set and some patience. Frequent maintenance keeps your bike in excellent shape and helps you prevent expensive repairs. BMW motorcycle parts are the best replacements because they’re designed to work with your motorcycle. They ensure safety and optimal performance. These steps can help you keep your BMW bike in perfect condition and ready for the road.